When you own a property you need to take care of lots of things. There are certain things that can turn out to be headache for the property owners. One such thing is mold. Molds tend to grow anywhere inside your property. Moisture is present in certain parts of your home which increases the tendency of having mold on floors.
If you have wooden flooring in your house, then molds can be a serious headache for you. You should always be careful about the presence of mold and try to treat them at the very initial stage to prevent it from spreading further. There are certain DIY processes but you might need professional help at some point of time.
Your first step should be to check the depth of the penetration of the mold on the floor. You can use a screwdriver to check the affected area. If you find the wooden floor spongy and soft then you need to understand that the mold has penetrated under the floorboards and in that case, you need to replace the board.
Home Remedies for Removing Mold on Floors
Here are some steps which can help you work on the affected area:
- First of all, you need to dry out the moisture from the affected area to remove mold on floors. You will need a fan or a source of air flow to help evaporate the moisture from the affected region.
- If the air flow is increased, then it will also prevent any kind of future growth of mold on floors.
- You must wait for the area to dry completely before you begin cleaning the mold on floors.
- Before you start cleaning mold on floors you need to avail proper protection for yourself. As the molds will be disturbed they will start releasing spores which might trigger breathing problem as well as different kind of allergies. You should always wear a mask as well as a protective eyewear before cleaning mold on floors.
- For the mold that are present on the surface of the floor you need to use a sandpaper of 100-grit. Now you need to scrap it in a circular motion. Once this is done, you will need a 200-grit sandpaper to scrap away the fungus that has already penetrated deep inside the floor. Finally, you need to use sandpaper of 200 or even 250-grit to smoothen the affected area.
- The next step is to spray chlorine bleach for the mold on floors. The ratio of chlorine bleach should be 8:1. Let the solution sit for at least few minutes. In the end you can use a rag to wipe off the solution and hence getting rid of live mold on floors.
- If you find out that the floor mold has affected the baseboards, then you need to remove the affected part with a utility knife and throw away all the affected materials right away. Now you will require new floorboards for the finishing.
- Once you install the new floor you will need a wood finish coat to give it the perfect look. You can also use polyurethane with the coat to prevent mold on floors in future.
To remove mold from the surface of the floor, a chlorine bleach solution mixed with water in the ratio of 10:1 can do justice. This solution is easily available in hardware stores in your locality.
But if you want to avoid the hazards of getting rid of mold on floors then you can always contact Nationwide experts. Our team of experts comes along with the necessary equipment and assure a hundred percent result in getting rid of mold from your property.